Panasonic WV-CS850 Operating Instructions Manual

Contents

34BlinkingBlinkingBlinkingTurns to white(2) ALC Mode with SUPER-D2 OFF1. Move the cursor to the SUPER-D2 parameter and select OFF.(When you select MANUAL, SUPER-D2 is not available.) The itemMASK SET appears on the menu.2. Move the cursor to MASK SET and press the CAM (SET) key. The48 mask areas appear on the monitor screen. The cursor is blink-ing in the top left corner of the screen.3. To mask an area where back light is bright, move the cursor tothat area then press the CAM (SET) key. The mask turns white.Repeat this procedure to mask the desired area.4. To cancel a masked area, move the cursor to that area then pressthe CAM (SET) key. To cancel all masking area, press the F2 but-ton of the WV-CU550A. (For the WV-RM70, press the left and rightswitches simultaneously.)5. After masking is completed, press the MON (ESC) key. The 48mask areas on the monitor screen disappear and the field setupmenu appears.6. If you want to change the video output level (picture contrast),move the “I” cursor for LEVEL and adjust the level.7. Move the cursor to RET and press the CAM (SET) key to return tothe CAM SET UP menu. (To return to the camera picture, pressthe F4 button.)** ALC CONT **BACK LIGHT COMPSUPER-D2MASK SETLEVELRETOFF••••|••••- +** ALC CONT **BACK LIGHT COMPSUPER-D2MASK SETLEVELRETOFF••••|••••- +Intelligent Security & Fire