32 Camera Setting1. To display the Camera Setting Menu• Move the cursor to CAMERA , and press the CAM (SET) key.The camera setting menu is displayed.*** SET UP MENU ***PRESET 1*MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPLOCAL/REMOTESPECIAL1CAMERARS485 SET UP1510MINAUTO PANSEQOFFLOCALSetup menu** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2OFFALC---ONOFFINTATWONMANUAL SCamera setting menuCharacter editing menuCAM1** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2OFFALC---ONOFFINTATWONMANUAL S2. Camera Identification Setting (CAMERA ID)1. Move the cursor to CAMERA ID, and select ON (to display thecamera identification) or OFF by using the joystick.2. Follow the steps below to edit the camera ID characters:2-1 Move the cursor to CAMERA ID and press the CAM (SET) keyto display the character editing menu.2-2 Move the character cursor to the character you want to edit orchange by using the joystick, and press the CAM (SET) key.The selected character appears in the editing area.2-3 Repeat the steps above until all characters are edited.3. After editing the camera identification characters, follow the stepsbelow to set the position of the CAMERA ID on the monitorscreen.3-1 Move the cursor to POSI, and press the CAM (SET) key todisplay the ID position menu.3-2 Use the joystick to decide the position of the CAMERA ID onthe monitor screen. Press the MON (ESC) key to fix the posi-tion, and return to the character editing menu.Notes:• When you want the pointer to move to a specific character inthe editing area, select a new character, and press the CAM(SET) key. This function allows you to edit or correct a specif-ic character.• When you want a blank space in the CAMERA ID, move thecharacter cursor to SPACE, and press the CAM (SET) key.• When you want to erase all characters in the editing area,move the cursor to RESET and press the CAM (SET) key.CAMERA ID0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;!?=+-*/%$ÄÜÖÆÑÅSPACEPOSI RET RESETCAM1............Intelligent Security & Fire