Panasonic WV-CU650 Operating Instructions Manual

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Addendum Operating instructions

Contents

3311. When the copy has been completed, the check sum(SUM=nnnn) appears on the LCD of each system con-troller.When the copy has been successfully completed, thecheck sum is identical to each other.The LCD display of source system controller becomesas follows.The LCD display of destination system controller(s)becomes as follows.Note: If the check sum is not identical, check the con-nection of all the controllers, and retry the data basecopy.12. Turn off the power of source and destination systemcontrollers. PS·Data Operator Password CheckIn case operators have forgotten their passwords, theadministrator can check the passwords in the following pro-cedure. Operation1. Turn off the power.2. Turn on the power of system controller while holdingdown the button 4 and MON (ESC) button.“Admin Password” will appear on the LCD to enter thepassword.3. Enter the administrator password.The password entered will be displayed as “∗” marks.Notes:• The factory default is “650”.• If the password entered is wrong, the LCD displaywill return to Step 2.PSD Password CheckAdmin Password _____PSD Password CheckAdmin Password ∗ ∗ ∗ ∗ ∗4. Press the CAM (SET) button.If the password entered is correct, “User ID” and“Password” of Operator 1 will appear on the LCD whileyou are holding down the buttons.5. To search a desired operator, rotate the JogDial.The user ID and password of Operator 1 to 16 willappear interchangeably.6. Turn off the power.Operator 1 informationRotate the JogDial.Rotate the JogDial.Operator 2 informationOperator 16 information••Rotate the JogDial.No.01 User ID 650Password 650No.02 User ID 1Password 12345No.16 User ID 100Password 100Data Base Rx ModeCompleted Sum=1733Data Base Tx ModeCompleted Sum=1733No.01 User ID 650Password 650