Panasonic WV-CU650 Operating Instructions Manual

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Addendum Operating instructions

Contents

66 BW ModeYou can change the color mode of camera images fromcolor to black and white. This function is activated toimprove the camera sensitivity when monitoring a darkplace.Note: Refer to the operating instructions of camera fordetails on auto mode.1. Display “BW Mode” sub menu. (Refer to Step 1 to 4 ofp. 61 To Recall Menu Functions.)2. Press one of the F1 to F4 buttons.BW mode will be activated.Available buttons and functionsF1: OnChanges the camera image from color to black andwhite.F2: OffChanges the camera image from black and white tocolor .F3: Auto1Activates Auto 1 mode. (The camera selects blackand white mode if the picture is dark, or color modeif the picture is bright enough.)F4: Auto2Activates Auto 2 mode. (The camera detects thelight source type to prevent malfunction. This set-ting is applicable when using a near-infrared lightsource in a dark place.)Notes:• The camera detects light source based on the informa-tion the CCD image pickup element receives. If anobject is continuously moving or has the same color asthe background, the object may not be properly recog-nized. When activating Auto 2 mode, make sure thewavelength of light source is 800 nm or more.• If the available parameters for selected camera are ON,OFF, and AUTO, you can activate AUTO by pressingthe F3 button.To recover the color modePress the F2 button. The color mode is recovered for thecamera image. Patrol LearnYou will perform the patrol learn setup.Note: Refer to the operating instructions of camera fordetails on patrol learn.1. Display “Patrol Learn” sub menu. (Refer to Step 1 to 4of p. 61 To Recall Menu Functions.)2. Press the F1 button.The patrol learn setup will start.3. Perform desired camera operations by moving the 3Djoystick or zoom wheel controller, etc.The following controls are available for patrol learn.• Panning/Tilting (3D joystick)• Iris control (IRIS OPEN/CLOSE buttons)• Focus control (FOCUS FAR/NEAR buttons)• Zoom control (Zoom wheel controller)• Preset positionNote: The available total time of patrol learn differsdepending on cameras. When the time is over, thepatrol learn setup will automatically stop.4. To quit the patrol learn setup, press the F2 button.To activate preset positions during the patrollearnTo move the camera to a preset position during the patrollearn, you will perform the following operations after Step 2of Patrol Learn.1. Enter a preset position number.The entered number will appear on the LCD.Note: To cancel the entry, press the CLEAR button.2. Press the PRESET/PGM PRESET button.“Pre=nn” (nn is a number.) will blink on the LCD, andthe camera will move to the preset position.BW Mode 103On Off Auto1 Auto2F1 F2 F3 F4Patrol Learn 104Start StopF1 F2 F3 F4Patrol Learn ____3Start StopF1 F2 F3 F4