Panasonic WV-CU650 Operating Instructions Manual

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Addendum Operating instructions

Contents

52 Camera Position ControlCamera position is the association of camera numbers andpreset position numbers. Up to 1 000 camera positions areregistrable in the system, and you can move a desiredcamera to a desired preset position only by entering a cam-era position number.Note: To activate this function, preset positions and camerapositions need to be registered. (Refer to p. 51 To reg-ister preset positions and p. 76 Camera PositionRegistration or Clearing.)1. Select a system unit and monitor. (Refer to p. 41System Unit Selection and p. 42 Monitor Selection.)2. Enter a camera position number by pressing the numer-ic buttons. The entered number will appear on the LCD.3. Press the CAM POSI button.The registered camera and preset position will beselected, and the camera position image will be dis-played on the active monitor. Camera Selection RecallEvery time you select a camera or camera position, thissystem controller memorizes up to 10 steps of cameraselection. You can recall these operations in order orreverse order. In the following procedure, you can trackback the camera images formerly displayed.Note: After power-off or system unit selection, thememorized camera operations will be cleared.In the following example, Camera 1 → 3 → 128 hasbeen selected.1. Press the – button while holding down the HISTORYbutton. The camera image formerly selected will be dis-played on an active monitor. (Camera 128 → 3)Note: To recall camera images more formerly selectedone by one, repeat pressing the – button while hold-ing down the HISTORY button. (You can recall up to10 camera images.)2. To return to the camera image more recently selected,press the + button while holding down the HISTORYbutton. The camera image more recently selected willbe displayed on the monitor. (Camera 1 → 3 → 128)Note: To return to the camera images more recentlyselected one by one, repeat pressing the + buttonwhile holding down the HISTORY button. Wiper ControlThe following procedure is available when a selected cam-era (housing) is equipped with a wiper.1. Select a system unit, monitor, and desired camera.(Refer to p. 41 System Unit Selection, p. 42 MonitorSelection, and p. 42 Camera Selection.)2. Keep pressing the WIPER button.The wiper will be activated while this button is beingpressed.Mon01 C-P011 HD316F1 F2 F3 F4Mon02 Cam128 HD316F1 F2 F3 F4Mon02 Cam003 HD316F1 F2 F3 F4Mon02 Cam001 HD316F1 F2 F3 F4Mon02 Cam001 HD316F1 F2 F3 F4Mon02 Cam003 HD316F1 F2 F3 F4Mon02 Cam128 HD316F1 F2 F3 F4Mon01 Cam001 ___11F1 F2 F3 F4