49 Time & Date Search PlaybackYou can search playback images by entering a desiredrecording date and time.Note: To cancel the entry, press the MON (ESC) or EXITbutton. The LCD display will return to the normal status.1. Press the T & D SEARCH button while holding down theSHIFT button. The time-and-date entry form will appearon the LCD.Note: You can change the display pattern setting.(Refer to p. 71 Time & Date Search Display Pattern.)2. Move the cursor to a position to be edited by perform-ing either of the following.• Move the 3D joystick controller to the right or left.• Rotate the shuttle ring clockwise or counterclock-wise.3. Enter the desired date and time by by performing eitherof the following.• Rotate the JogDial clockwise or counterclockwise.• Press the numeric buttons.4. Press the PLAY/PAUSE or CAM (SET) button. Theimage on the specified date and time will be playedback on the active monitor.After the image has been played back, the LCD willreturn to the default status.When using WJ-HD500 SeriesGroup selection is required after Step 3. Perform as follows.1. Press the PLAY/PAUSE or CAM (SET) button."Group Select" menu will appear on the LCD.2. Select a desired group to play back by rotating theJogDial.3. Press the PLAY/PAUSE or CAM (SET) button again.The image on the specified date and time will beplayed back on the active monitor.Mmm/DD/YYYY HH:MM 12Mar/16/2004 01:32 PMMmm/DD/YYYY HH:MM 12Mar/17/2004 12:00 AMHD500 Index SearchGroup Select=All-GNote: Image to be played back differ depending onrecorders. (Refer to the operating instructions ofrecorder.) Other Available FunctionsDepending on recorders, the following functions are avail-able.• Disk selection (WJ-HD300 Series only) (p. 67)• A - B repeat playback setting (WJ-HD300 Series only)(p. 67)• Filtering ON/OFF (WJ-HD300 Series only) (p. 68)• Displaying camera and playback image (WJ-HD500Series only) (p. 68)• Recorded-image copy (WJ-HD500 Series only) (p. 83)• Alarm search (WJ-HD200 Series / WJ-HD100 Series) (p.84)