7PRECAUTIONS• Refer all work related to the installation of thisappliance to qualified service personnel or systeminstallers.• Do not block the ventilation opening or slots on thecover.To prevent the appliance from overheating, place it atleast 5 cm {2 inches} away from the wall.• Do not drop metallic parts through slots.This could permanently damage the appliance. Turnthe power off immediately and contact qualified servicepersonnel for service.• Do not attempt to disassemble the appliance.To prevent electric shock, do not remove screws orcovers.There are no user-serviceable parts inside. Contactqualified service personnel for maintenance.• Do not expose nor operate the appliance inwet/damp conditions.Take immediate action if the appliance gets wet. Referservicing to qualified service personnel. Moisture coulddamage the appliance and also cause electric shocks.• Handle the appliance with care.Do not strike or shake, as this may damage the appli-ance.• Do not expose the appliance to water or moisture.Do not try to operate it in wet areas.Take immediate action if the appliance gets wet. Turnthe power off and refer servicing to qualified servicepersonnel. Moisture can damage the appliance andalso cause electric shocks.• Do not use strong or abrasive detergents whencleaning the appliance body.Use a dry cloth to clean the appliance when it is dirty.When the dirt is hard to remove, use a mild detergentand wipe gently.• Do not operate the appliance beyond its specifiedtemperature, humidity, or power source ratings.Use the appliance under conditions where tempera-tures are between –10 °C and + 50 °C {14 °F to 122°F}, and humidity below 90 %.The appliance may be not linked to a network after turn-ing on in a cold atmosphere between –10 °C and 0 °C{14 °F to 32 °F}. Wait approximately 20 minutes until theinside temperature has risen to 0 °C {32 °F}, it can belinked to a network.The input power source for this appliance is 120 V AC,60 Hz.• Do not use any AC adapter other than the onesupplied.• Only use the appliance indoors.Do not install it in places where the appliance isexposed to sunlight for long periods of time or near airconditioning equipment. This will cause deformation,discoloration, breakdown or malfunction.