Panasonic WV-CU650 Operating Instructions Manual

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Addendum Operating instructions

Contents

67Note: After the camera has moved to the preset posi-tion, “Pre-nn” will go out. Auto Pan Setup and ActivationYou will set up and activate the auto pan function. The cam-era can pan between the start and end points you will set.To set the start and end point of auto pan1. Display “Auto Pan” sub menu. (Refer to Step 1 to 4 of p.61 To Recall Menu Functions.)2. By moving the 3D joystick, move the camera to a pointyou wish to start auto pan.3. Press the F3 button.The start point of auto pan will be set.4. By moving the 3D joystick, move the camera to a pointyou wish to end auto pan.5. Press the F4 button.The end point of auto pan will be set.To activate auto panPress the F1 button.The auto pan will be activated, and the camera will panbetween the set.Notes:• If you press the F2 button, and then activate the autopan, the auto pan range will be reversed.• Auto pan will be canceled when you pan or tilt theselected camera by moving the 3D joystick. Recorder Functions Disk Selection(WJ-HD300 Series Only)You will specify a disk for search playback.1. Display “HD300 DiskSelect” sub menu. (Refer to Step 1to 4 of p. 61 To Recall Menu Functions.)2. Press one of the F1 to F4 buttons.The specified disk will be selected.Available buttons and functionsF1: Nr-ASpecifies the normal or event recording area forplayback.F2: Cp-ASpecifies the copy area for playback.F3: Cpy1Specifies the external recording device connectedto COPY 1 for the playback media. (This button isavailable for WJ-HD316A and WJ-HD309.)F4: Cpy2Specifies the external recording device connectedto COPY 2 for the playback media. (This button isavailable for WJ-HD316A and WJ-HD309.)3. When you specify a disk, the search list display willappear on the active monitor, and “Search Mode” menuwill appear on the LCD. Then, perform the search play-back operation. (Refer to p. 45 Search Playback.) A-B Repeat Playback Setting(WJ-HD300 Series Only)You can playback the recorded images repeatedly byspecifying the start point (A) and end point (B).1. Display “HD300 A- B Repeat” sub menu. (Refer to Step1 to 4 of p. 61 To Recall Menu Functions.)2. During playback, press the F1 button at the point youwish to start playback. The playback start point (A) willbe set.Note: To cancel the start point, press the F4 button.HD300 A—B Repeat 202Start End CancelF1 F2 F3 F4Auto Pan Setup 105Play Rvrs Start EndF1 F2 F3 F4Search Mode HD300Thumb Text CopyPatrol Learn Pre003Start StopF1 F2 F3 F4 HD300 DiskSelect 201Nr-A Cp-A Cpy1 Cpy2F1 F2 F3 F4