12Setting the NTP server [NTP]Click the [NTP] tab on the "Basic setup" page.Settings relating to the NTP server, such as NTP server address and port number, can be configured on thispage.No. Item Description(1) [Time adjustment]Default: Manual setupSelect whether time should be adjusted manually or synchronized withthe NTP server.Manual setup The time set on the [Basic] tab on the "Basic setup" page will be used asthe standard time of the camera.Synchronizationwith NTP serverThe time automatically adjusted by synchronizing with the NTP server willbe used as the standard time of the camera.(2) [NTP server address]*Default: None (blank)Enter the IP address or host name of the NTP server.Number of characters for the NTP server address: 1 to 128Important• When entering the host name for [NTP server address], it isnecessary to configure the DNS settings on the [Network] tab of the"Network setup" page. (→ page 52)• Enter the domain name using alphanumeric characters.(3) [NTP port]*Default: 123Enter a port number to be used for the NTP server.Available port number: 1 to 65535(4) [Synchronizationinterval]*Default: 1 hourSelect an interval (1 - 24 hours: in 1 hour intervals) of synchronizationwith the NTP server.(5) [Time zone]*Default: (GMT)Greenwich Mean Time :Dublin, Edinburgh,Lisbon, LondonSelect a time zone corresponding to the location where the camera is inuse.* Set these items when [Time adjustment] is set to "Synchronization with NTP server".(1)(2)(3)(4)(5)
