31Setting the privacy zone (privacy zone setup screen)Click the [SETUP>>] button for "Privacy Zone" on the [Image/ABF] tab. (→ page 21)When there is a zone that is not to be displayed in a captured location (screen), that zone (privacy zone) canbe configured not to be displayed. Up to 8 privacy zones can be configured.No. Item Description(1) [Mode]Default: OFFSelect a display mode for the privacy zone.Gray Privacy zones will be displayed in gray.Mosaic Privacy zones will be displayed with a mosaic effect.OFF Privacy zones will not be displayed.(2) [Zone select] Click to select a privacy zone.Zone No Select a number (1 to 8) from "Zone No".An asterisk "*" to the right of the a number indicates that a privacy zonehas been configured.[SET] button Click this button to set the size and position for aligning the mask with thelocation to be masked out.[DEL] button Click this button to delete a selected privacy zone.[CANCEL] button Click this button to return the privacy zone size and position to its originalsetting.(3) [Privacy zone size] When you press the [+] button, the privacy zone expands horizontally orvertically. When you press the [-] button, the privacy zone shrinkshorizontally or vertically.(4) [Privacy zone position] Click these buttons to move the position of the privacy zone up/down/left/right.(5) [CLOSE] button Click this button to close the "Privacy Zone" setup screen.(1)(2)(3)(4)(5)
