Panasonic WV-NW484S Setup Manual

Also see for WV-NW484S - i-Pro Network Camera: Product catalog Brochure Reference Product catalog Comparison chart

Contents

Panasonic WV-NW484S Setup Manual Manual pdf 29 page image

29Setting back focus (back focus setup screen)Click the [SETUP>>] button for "Back Focus" on the [Image/ABF] tab. (→ page 21)The following describes how to configure the back focus settings.Important• When the settings of the [Adjusting method] and [Lens temperature compensation] have been changed,be sure to click the [SET] button.No. Item Description(1) [Auto back focus] Select this item to automatically adjust the back focus of a subject in thecenter area of the screen.[Execute] button Click this button to activate the ABF function.(2) [Focus] buttons Click these buttons to fine-adjust the focus.Click the [RESET] button to reset the focus to the default.[NEAR] button Click this button to adjust the back focus towards the near side.[RESET] button Click this button to return the back focus position to its default.[FAR] button Click this button to adjust the back focus towards the far side.(3) [Adjusting method]Default: AUTOSelect the back focus settings.AUTO When switching between the color mode and the black and white mode,the back focus is automatically adjusted and focus deviation is corrected.PRESET When switching between the color mode and the black and white mode,the focus shifts to the preset back focus positions set for each imagemode. The last back focus positions that were set for the color mode andblack and white mode are automatically stored to memory as the presetpositions.FIX The position after adjustment of the back focus by ABF (automatic backfocus) or manually by "Focus" is fixed.(4) [Lens temperaturecompensation]Default: ONSelect whether or not to automatically compensate focus by usingchanges in temperature. This setting should normally be left at "ON".ON The focus is automatically compensated.OFF The focus is not automatically compensated.(5) [CLOSE] button Click this button to close the "Back Focus" setup menu.(1)(2)(3)(4)(5)