Panasonic WV-NW484S Setup Manual

Also see for WV-NW484S - i-Pro Network Camera: Product catalog Brochure Reference Product catalog Comparison chart

Contents

Panasonic WV-NW484S Setup Manual Manual pdf 42 page image

42Setting the four preset VMD areasSetting VMD areas divided in 4 areas for each outline color.Important• The VMD alarm detect function may not work while the settings are being updated on the setup page.• Alarm setup page1 Click the [VMD area] tab on the "Alarm setup" page.2 Drag the mouse across the image and select thearea. Clicking the [All Areas] button selects all areasand surrounds them with a white frame.3 Change [Status] for the outline color to set as a VMDarea to [ON].4 Select "High/Middle/Low" for [Detection sensitivity].The detection sensitivity set here is common to allareas.5 Click the [Setup] button.The settings are reflected.6 To turn a VMD area OFF, change the [Status] settingfor the corresponding area to OFF.When the [SET] button is clicked after selecting[OFF], the outline color will be indicated as a brokenline. No alarm operation will be performed even whenmotion is detected in an area whose [Status] settingis OFF.1324 56