46Configure the Authentication Settings [Authentication]Settings relating to authentication, such as user and PC (IP address) restrictions for accessing the camerafrom a PC can be configured on the "Authentication setup" page.The "Authentication setup" page has two tabs: the [User] tab and the [Host] tab.Setting user authentication [User]Click the [User] tab on the "Authentication setup" page.The settings relating to user authentication for restricting access to the camera from a PC can be configuredon the "Authentication setup" page.Up to 16 users can be registered..........................................................................................................................................................................Note• This camera can no longer be accessed if user authentication fails (authentication error) from a PC withthe same IP address for 8 times or more in 30 seconds. Wait for a while before retrying to access thecamera...............................................................................................................................................................................(1/2)No. Item Description(1) [User authentication]Default: OFFSelect whether or not to authenticate the users.ON Users are authenticated.OFF Users are not authenticated.(2) [User name] Enter a user name.Number of characters for the user name: 1 to 32(3) [Password]/[Retypepassword]Enter the password.Number of characters for the password: 4 to 32................................................................................................................Note• When a user name already in use is entered and the [SET] button isclicked, the relevant user information will be overwritten......................................................................................................................(1)(2)(5)(3)(4)