22Adjusting picture quality (picture quality adjustment screen)Click the [SETUP>>] button under "Image Adjust" on the [Image/ABF] tab. (→ page 21)Settings relating to adjustment of image quality can be configured in a newly displayed window. When valuesare changed, the changed values will be applied immediately to the image displayed on the [Image/ABF] tab.(1/4)No. Item Description(1) [Super Dynamic 3]Default: ONSelect whether or not to turn Super Dynamic 3 on.................................................................................................................Note• When lighting conditions cause flickering, changes in color or noise,set the shutter speed to "OFF"......................................................................................................................ON Super Dynamic 3 is turned on.OFF Super Dynamic 3 is turned off.(2) [Mask area] When "OFF" is selected for [Super Dynamic 3], it is possible tocompensate for backlight by masking brighter areas in an image.For further information about masking see page 26.START Start the mask area settings.END End the mask area settings.RESET Delete the set mask area.(3) [Shutter]Default: AUTOSelect the speed of the electronic shutter. Flickering may not becompensated even when "AUTO" is selected. When flickering appearsfrequently, set the shutter speed to "1/100".AUTO The shutter speed is automatically adjusted to reduce flickering causedby fluorescent lamps.OFF Fixed at 1/60 seconds.1/100 Fixed at 1/100 seconds.(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12)(13)(14)(15)(16)
