Hotwire Menus and Screens2-58000-A2-GB26-10 January 1999Hotwire Menu HierarchyThis section describes the menu structure of the Hotwire user interface.Hotwire Chassis Main MenuThe following illustration shows the Hotwire Chassis Main Menu.Hotwire ChassisA. Chassis InfoB. Card SelectionC. Logout97-15566-01From the Hotwire Chassis Main Menu, you can select: A. Chassis Info to enter or display chassis information, such as the chassisname, name of person responsible for the system, and physical location ofthe chassis. B. Card Selection to select a particular card in the chassis. This screen alsodisplays status information about all cards in the chassis. The card you selectdetermines which Hotwire menu the system will display next (Hotwire – DSLmenu).For more information, seeCard Selection Screen on page 2-10. C. Logout to exit from the current login session on the Hotwire DSLAM.For more information, seeExiting from the System on page 2-12.Hotwire – MCC MenuAfter selecting the MCC card from the Card Selection screen, the DSLAM systemdisplays the Hotwire – MCC Menu. From this menu, you can configure, monitor,run applications, and troubleshoot the MCC card.For information on the MCC card, see theHotwire Management CommunicationsController (MCC) Card, IP Conservative, User’s Guide.