Monitoring the Hotwire DSLAM5-4 8000-A2-GB26-10January 1999DSL Monitoring Physical Layer ScreensUse the Physical Layer screens to display read-only system information aboutphysical ports. ProcedureTo view the active ports list, Ethernet statistics, and HDLC bus statistics:1. Follow this menu selection sequence:Monitoring →Physical Layer (B-B)2. The Physical Layer menu appears. Select the submenu option as shown inTable 5-2 and press Enter.Table 5-2. Physical Layer Options (1 of 6)Active List (Active Ports List) B-B-ADisplays a list of the current status of all the active ports (e1a = Ethernet;s1c, s1d, s1e, and s1f = DSL cards).Num – Number of the port.Name – Name of the port.Description – Type of port.MAC Address – MAC address of the active port. (Internal dummy address used fornon-Ethernet ports.)Status – In-use or disconnected.