Configuring the Hotwire DSLAM3-4 8000-A2-GB26-10January 1999Configuring the Active VNID on each DSL PortYou can configure multiple VNIDs with different next hop routers with one activeVNID configured per port. ProcedureTo configure the active VNID on each RADSL or MVL port from the Hotwire –DSL menu:1. Follow this menu selection sequence:Configuration →Bridge →Port VNID (A-E-C)2. Enter the port number at the DSL Port #: prompt.3. Enter a (to activate) at the Action(Edit/Activate/Deactivate):prompt.4. Enter the number of the VNID to be assigned to this port at the InputNumber: prompt. If you want a VNID that spans several RADSL or MVLcards, you must specify the same VNID number across all cards.Activate each port separately.5. Press Ctrl-z and save the changes.NOTES:For more information about the fields listed above, see Table 4-4, BridgeOptions, in Chapter 4,8310 MVL and 8510 RADSL Card Configuration.