A-18000-A2-GB26-10 January 1999Download CodeAThe Download Code menu option on the Hotwire DSLAM gives you the ability toupgrade your software with a new version of code and then apply this code toyour system.New firmware releases are typically applied to the MCC card, DSL cards, and/orendpoints in your system.When a software upgrade affects both the MCC and the DSL cards, you mustdownload and apply a new version of code into each of the DSL cards beforeyou download and apply a new version of code into the MCC.When you are downloading code to an endpoint, configure your TFTP server withthe following timeout values: Retransmission timeout – Value not less than 10 seconds. Total transmission – Value not less than three times the retransmissiontimeout.You can also use the above values for a standard TFTP transfer.
