Configuring the Hotwire DSLAM3-2 8000-A2-GB26-10January 1999Configuring the DSL CardsUse the procedures in the following order to minimally configure DSL cards foruser data connectivity. For detailed information on these instructions,see Chapter 4,8310 MVL and 8510 RADSL Card Configuration.For information about MCC and DSL card network topologies, consult theHotwireDSLAM for 8310 MVL and 8510 RADSL Cards Network Configuration Guide. Toconfigure the MCC card, refer to theHotwire Management CommunicationsController (MCC) Card, IP Conservative, User’s Guide.The following table lists optional steps to configure the VNID for the DSL card.For each DSL card, to . . . See . . .1. Configure VNID(s) on a RADSL or MVLcardConfiguring VNID(s) on a DSL Card,page 3-3.2. Select the active VNID on each RADSLor MVL portConfiguring the Active VNID on each DSLPort, page 3-4.3. Configure static usersConfiguring Static Users, page 3-5.4. Configure IP filter rulesConfiguring IP Filter Rules, page 3-7.
