Paradyne ACCULINK 317x E1 Operator's Manual

Contents

ACCULINK 317x E1 DSU/CSUE-18 December 1996 3170-A2-GB20-20Table E-1(3 of 3)SNMP MIB to Front Panel Command Cross-ReferenceFront Panel Command SNMP MIB ObjectTest–>Ptrns–>Send–>511–>PrtnTest–>Ptrns–>Abort–>Send–>PrtnSet IfExtnsTestType for portn totestSend511Set IfExtnsTestType for portn tonoTestTest–>Ptrns–>Mon–>QRSS–>PrtnTest–>Ptrns–>Abort–>Mon–>PrtnSet ifExtnsTestType for portn totestMonQRSSSet ifExtnsTestType for portn tonoTestTest–>Ptrns–>Mon–>511–>PrtnTest–>Ptrns–>Abort–>Mon–>PrtnSet ifExtnsTestType for portn totestMon511Set ifExtnsTestType for portn tonoTestCnfig–>Load Cnfig–>Save Set devConfigAreaCopy to desired choice (Active to Customer1, etc.)Cnfig–>Activ–>Edit–>DTE–>DTE–>Frame Set/Display dsx1LineType for DTE E1 todsx1E1 ordsxE1-CRCCnfig–>Activ–>Edit–>DTE–>DTE–>Coding Set/Display dsx1LineCoding for DTE E1 todsx1HDB3 ordsx1AMICnfig–>Activ–>Edit–>Port–>Prtn->Port Type Display rs232PortType for portn tors422 orv35Cnfig–>Activ–>Edit–>Port–>Prtn–>TxClock Set/Display rs232SyncPortClockSource for portn tointernal orexternalCnfig–>Activ–>Edit–>NET–>NET Frame Set/Display dsx1LineType for NET E1 todsx1E1 ordsxE1-CRCCnfig–>Activ–>Edit–>NET–>Mgmt Link Set/Display dsx1Fdl for NET E1 todsx1other ordsx1FDL-noneCnfig–>Activ–>Edit–>Chan–>DTE–>Assign Set/Display dsx1FracNumber and dsx1FracIfindex for DTE E1Cnfig–>Activ–>Edit–>Chan–>DTE–>TS16 Display dsx1SignalMode for DTE E1 tonone ormessageOrientedCnfig–>Activ–>Edit–>Chan–>Prtn–>Assign ToCnfig–>Activ–>Edit–>Chan–>DsplySet/Display dsx1FracNumber and dsx1Fracifindex for DTE orNET E1Cnfig–>Activ–>Edit–>Chan–>Prtn–>Port Rate Display rs232PortInSpeed or rs232PortOutSpeed for portnCnfig–>Activ–>Edit–>Gen–>Pri Clk SrcCnfig–>Activ–>Edit–>Gen–>Sec Clk SrcDisplay dsx1TransmitClockSource for DTE E1 or NET E1 (Displaysthe active clock only)Cnfig–>Activ–>Edit–>User–>Com RateCnfig–>Activ–>Edit–>User–>Aux RateSet/Display rs232PortInSpeed or rs232PortOutSpeed for COM orAUX portCnfig–>Activ–>Edit–>User–>Char Length Set/Display rs232AyncPortBits for COM portCnfig–>Activ–>Edit–>User–>CParty Set/Display rs232AyncPortParity for COM portCnfig–>Activ–>Edit–>User–>CStop Bits Set/Display rs232AyncPortStopBits for COM port