Paradyne ACCULINK 317x E1 Operator's Manual

Contents

ACCULINK 317x E1 DSU/CSU3-30 December 1996 3170-A2-GB20-20Individual Channel Assignment MethodThe Assign By configuration option screen appearsafter you select a port.To assign by the individual channel method,1. Press F3 (Chan).F1Assign B y:Next Block ChanF2 F32. Press F1 (Next) to display the next configurationoption (channel allocation).3. Line 1 displays the 31 channels for the NetworkE1 interface or the DTE Drop/Insert interface,depending on which destination was chosen. Thisexample assumes that the Network E1 interface isthe destination. Line 2 displays what is allocatedto the DS0 channel shown in Line 1. Pressing theor key scrolls the channels onto the screenin groups of three. Select the channel by pressingthe Function key under the desired number. Portnappears. The port is assigned to that channel. Todeallocate a port, press the Function key underthat port number. Pressing the Function key underchannels assigned to other ports has no effect.F1N1 N2Next Prt1 Prt2F2 F3NOTEN16 will not appear if time-slot 16(TS16) is reserved for signaling.(This is the default for TS16.)Allocating DS0 Channels from theDrop/Insert Interface to the NetworkInterfaceYou can allocate DS0 channels from the DTEDrop/Insert interface to the Network interface and specifywhether time-slot 16 (TS16) is reserved for signalinginformation.To allocate DS0 channels from the DTE Drop/Insertinterface to the Network interface,1. Press F3 to select Cnfig from the top-level menuscreen.2. Select the configuration option set to be copiedinto the Edit area by using the appropriateFunction key. Use the scroll keys, if necessary.3. Press F1 to select Edit.4. Press the key from the Edit screen to displaythe Chan selection.5. Select Chan.F1Edit:Port NET ChanF2 F36. From the Channel Config screen, press F3 toselect DTE.F1Channel Config:Dsply Clear DTEF2 F3