Paradyne COMSPHERE 3550 Series User Manual

Also see for Comsphere 3551: Installation manual Quick reference guide

Contents

Status Indicators and Control Panel MessagesC-73550-A2-GB20-40 July 1999Table C-5Subnetwork Health and Status MessagesMessage ConditionDevic TDM/Flex only: Device Failure. One of the following major alarms is in effect:Configuration CorruptDevice Test FailureMUX Device FailureDialBU Dial BackUp mode. Indicates that the DBM is active.DialCN Dial Connect. Indicates that the DBM is in Standby mode.DialTn Dial Tone Test failure.Disab Indicates that the DSU, DBM, or Portnn is disabled.DTR DTE alarm. Data Terminal Ready lead is Off.ExtLd External lead alarm a or b.Facil DDS facility alarm. Indicates a network facility alarm.MUX Indicates a MUX (TDM/Flex) failure.NoResp The active poll list member did not respond. Probable cause: a facility problem, aremote DSU problem, or an incorrect poll list.Normal Active poll list member does not report an alarm or its status.RPower Redundant power supply alarm.Stndby DBM is in Dial Standby.Stream Streaming terminal.SubSpd Subnormal operating speed.Test Test mode. It could be a DSU, DBM, or Port test.Thresh Threshold is exceeded.TribTm Multipoint tributary time-out. Multipoint tributary is not answering polls.Trunc Subtree truncation. More information is being received than can be returned in the poll.You must access each tributary for its messages.