B-3 Sequencing LogicAC30 series Variable Speed InverterThe OPERATION ENABLED state is the normal operation state of the Drive. In this state the Reference Ramp is active, generating a SpeedDemand. Sub-states and allowed transitions are shown below. Note – the RUNNING sub-state also includes JOGGING.OPERATION ENABLEDOPERATION ENABLEDRUNNING STOPPING(DISABLE OPERATION)SHUTTING DOWN(SWITCH OFF)489 115STATE TRANSITIONSState transitions are caused by internal events in the Drive or external commands via the Control Word. The transition numbers below relate tothose on the Sequence Diagram.Transition 0: No Power to NOT READY TO SWITCH ONPower has been applied to the control electronics of the drive.
