Menu Organisation 8-2AC30V series Variable Speed DriveMenu DescriptionsCONTROL SCREENIn local sequencing mode the Control Screen menu shows the Local Setpoint, matching speed feedback and configuration of the action of theRun key and direction. When the AC30V is not in local sequencing mode this menu shows the operating speed. The contents of the ControlScreen can be modified by the configuration.SETUPParameters that may require modification once the Setup Wizard is complete.MONITORThis menu contains parameters commonly used to verify the correct operation of the drive and the process.FAVOURITESThe Favourites menu contains up to 20 parameters selected for ease of access.To add a parameter to the Favourites menuUsing the GKP, navigate to the parameter of interest.Press and hold the OK key until the Attributes screen is shown, (hold for about 2s)then this appears and press the “Add to Favourites” soft key.To remove a parameter from the Favourites menuUsing the GKP navigate to the parameter of interest in the Favourites menu.Press and hold the OK key until the Attributes screen is shown, (hold for about 2s).Press the “Remove from Favourites” soft key, .UPDATE FIRMWAREThis menu is shown when a firmware upgrade is available on the inserted SD card.PARAMETERSA complete collection of all the parameters in the AC30V. This menu is intended for expert use.or is shown herePress the right soft key to add to orremove from FavouritesOK Key
