Parameter Reference D-26AC30V series Variable Speed DriveDrive infoSetup::EnvironmentParameters::Device Manager::Drive infoPNO Parameter Descriptions0961 Drive NameA string value that may be used to identify this drive in a system.1100 Firmware VersionThe version of the firmware running in the Control Module.0951 Boot VersionThe version of the boot loader firmware running in the Control Module, presented as a text string.0687 Boot Version NumberThe version of the boot loader firmware running in the Control Module.0987 Power Stack RequiredThe rating of the power electronics for the configuration loaded in the drive. If 0987 Power Stack Required is different from 0543Power Stack Fitted the drive will be prevented from operating normally until the configuration is corrected.0543 Power Stack FittedThe rating of the power stack that the Control Module is fitted to. When the Control Module not attached to a stack this parameter isnot visible and is ignored.0695 Attached to StackA Boolean parameter that indicates that the Control Module is attached to a power stack. When the Control Module is not attached toa stack but is powered using the auxiliary 24v input this parameter will indicate FALSE.1109 Stack PcodeThe product code string that may be used to order an equivalent Power Stack.1258 Stack Serial NoThe serial number of the Power Control Card, (part of the Power Stack assembly).1116 Control Module PcodeThe product code string that may be used to order an equivalent Control Module, excluding options.0977 Control Module SerialThe serial number of the Control Module.
