Philips HD5730 User Manual

Also see for HD5730: User manual Manual User manual Quick start guide

Contents

Open the lid of the ground coffee container and put one levelmeasuring spoon of ground coffee in the funnel.5 Brew 1 cup of coffee as described in ‘Brewing espresso from coffeebeans’.When you use ground coffee, you cannot brew cups at the same time.6 If you want to make coffee from beans instead of ground coffee again,press the coffee strength/ground coffee button and select the desiredcoffee strength with the ^ or % button.7 Press the OK button to confirm the desired coffee strength.Changing the coffee quantity for espressoThe appliance is preset to brew the following coffee quantities:short coffee: 40mlstandard coffee: 80mllong coffee: 120mlTo change the standard quantities, proceed as follows:1 Put a cup under the coffee spout. Press the button for short coffee, standard coffee or long coffee,depending on which quantity you want to change. Press thisbutton for 5 seconds UNTIL the message ‘PROGRAM TO SET VOL...’appears on the display and then release it.The appliance starts to brew coffee. When the coffee in the cup reaches the required level, press thesame button again to set the new quantity.’SETTING DONE!’ appears on the display. The appliance now brewsthe set quantity until you change it again.Brewing cappuccino or latte macchiato1 Move the release slide towards you and remove the lid of the milkjug. Fill the milk jug with approx. 150ml milk for each cappuccino or lattemacchiato to be prepared.It is advisable to use fresh skimmed or fresh semi-skimmed milk atrefrigerator temperature (about 5°C). Make sure the milk intake tube is properly inserted into the rubberring.---,,-EnglisH 1