Philips HD5730 User Manual

Also see for HD5730: User manual Manual User manual Quick start guide

Contents

getting startedBefore first useNever install the appliance in environments where the temperaturemay drop to 0° or below. If the water inside the appliance freezes, theappliance will be damaged.Note: It is normal that there are some traces of coffee and water in theappliance when you use it for the first time.This is because the appliance hasbeen tested in the factory to make sure it is in perfect working order.Note: If there is a sticker on the display, remove the sticker before you installthe appliance.1 Place the appliance on a table or worktop away from the tap, the sinkand heat sources. Leave a free space of at least 10cm above, behind and on both sidesof the appliance. Carefully follow the step-by-step instructions in the followingchapter to learn how to use the appliance correctly.Preparing for use1 Put the plug in the wall socket and wait.Different languages appear on the display. Press the OK button for seconds when the desired languageappears.The appliance automatically exits the MENU mode.The message ‘NO WATER! Fill water tank’ appears on the display. Remove the water tank from the appliance.Do not remove the water tank while the appliance is operating. Rinse the water tank and fill it with fresh water.Remove the lid to create a bigger filling opening.5 Put the water tank back and push it firmly into place.The message ‘INSERT WATER SPOUT’ appears.,,,,EnglisH8