6–Command Line Interfacecompare_luns addISR654608-00 C 6-9compare_luns addSchedules a standalone LUN compare job. You can name the job and associate itwith a job group. Scheduling options include: immediately, at a pre-defined latertime, or by serial scheduling. Serial scheduling requires that you assign a priorityto the job, which will be used to schedule it prior to (lower priority value) or after(higher priority value) a specific job in the serial schedule job queue.Authority miguserExamples The following example shows the compare_luns add command:iSR6200 <2> (miguser) #> compare_luns addA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Index WWPN, PortId Symbolic Name Target Type----- --------------------------------- -------------------- ------------0 20:78:00:c0:ff:d5:9a:05, 8c-01-ef HP MSA2012fc-0 Src+Dest1 50:00:1f:e1:50:0a:37:18, 82-01-00 HP HSV210-3 Src+DestPlease select a Source Target from the list above ('q' to quit): 1Index (VpGroup Name)----- --------------1 VPGROUP_12 VPGROUP_23 VPGROUP_34 VPGROUP_4Please select a VPGroup for Source Lun ('q' to quit): 1LUN Vendor LUN Size( GB) Attributes--- ------ -------------- ----------1 HP 10.00 SRC LUN2 HP 10.003 HP 20.004 HP 20.005 HP 10.006 HP 5.007 HP 5.008 HP 5.00
