5–Performing Data MigrationUsing the Data Migration WizardISR654608-00 C 5-15Using the Data Migration WizardThe Data Migration wizard helps simplify the configuration and scheduling of bothindividual and batches of data migration jobs. The following sections providewizard details: “Starting the Data Migration Wizard” on page 5-15 “Scheduling an Individual Data Migration Job” on page 5-15 “Scheduling Data Migration Jobs in Batch Mode” on page 5-19Starting the Data Migration WizardFollow these steps to start the data migration wizard, and then proceed withscheduling either an individual or batch data migration job.To start the data migration wizard:1. Start SANsurfer iSCSI/FC Router Manager and connect to the iSR6200 byproviding the IP address of the iSR6200.2. Start the data migration wizard using one of these methods: On the Wizards menu, click Configure Migration Jobs. In the left pane, open the Services page, right-click the Data MigrationJobs node, and then click Configure Migration Jobs.3. If the Data Migration Security Check dialog box appears, type the datamigration user password (default is migration), and then click OK.4. In the Create Data Migration Job dialog box, click Options.5. In the Migration Schedule Options dialog box, select either Schedule inbatch mode or Schedule individual job.6. Click OK.7. Depending on your selection in the preceding step, continue with either“Scheduling an Individual Data Migration Job” on page 5-15 or “SchedulingData Migration Jobs in Batch Mode” on page 5-19.Scheduling an Individual Data Migration JobFollow these steps to schedule an individual data migration job in SANsurferiSCSI/FC Router Manager.To schedule an individual data migration job:1. Start the data migration wizard by following the steps specified in “Startingthe Data Migration Wizard” on page 5-15.2. In the Migration Schedule Options dialog box, click Schedule individualjob, and then click OK.
