ISR654608-00 C B-1B Simple NetworkManagement ProtocolSimple network management protocol (SNMP) provides monitoring and trapfunctions for managing the router through third-party applications that supportSNMP. The router firmware supports SNMP versions 1 and 2 and a QLogicmanagement information base (MIB). You may format traps using SNMP version1 or 2.This appendix provides the following SNMP information for iSR6200 datamigration: “SNMP Parameters” on page B-1 “SNMP Trap Configuration” on page B-2 “Notifications” on page B-2SNMP ParametersYou can set the SNMP properties using SANsurfer iSCSI/FC Router Manager orthe CLI.Table B-1 describes the SNMP parameters.Table B-1. SNMP ParametersParameter DescriptionRead community A password that authorizes an SNMP management server to read informationfrom the router. This is a write-only field. The value on the router and the SNMPmanagement server must be the same. The read community password can beup to 32 characters, excluding the number sign (#), semicolon (;), and comma(,). The default is password is private.Trap community A password that authorizes an SNMP management server to receive traps.This is a write-only field. The value on the router and the SNMP managementserver must be the same. The trap community password can be up to 32 char-acters, excluding the number sign (#), semicolon (;), and comma (,). The defaultpassword is private.
