6–Command Line Interfacemigration_group add6-44 ISR654608-00 Cmigration_group addCreates a data migration job group that you can use to combine migration jobs tosimplify scheduling and monitoring of data migration processes.Authority miguserExamples The following example shows the migration_group add command:iSR6200 <1> (miguser) #> migration_group addPlease Enter Group Name that you want to create (Min = 4 Max = 64 chars) DM_1Successfully created Group DM_1To create a data migration job group in the CLI:1. Log in to the iSR6200 as guest and enter the password.2. Open a miguser session using the following command:miguser start -p migration(The default password for miguser is migration.)3. Create a migration group using the following command:migration_group add4. At the prompt, enter a name for the new group. The data migration groupname must be a minimum of 4 and a maximum of 128 alphanumericcharacters. You can create a maximum of eight job groups in addition to thedefault job group.The following shows an example of how to add a migration group in the CLI.iSR6200 <1> (miguser) #> migration_group addPlease Enter Group Name that you want to create (Min = 4 Max = 128characters) MS_Exchg_2Sucessfully created Group MS_Exchg_2
