5–Performing Data MigrationCreating a Data Migration Job Group5-14 ISR654608-00 C6. If you select User Defined, type a value between 50 and 1600 in the UserDefined Bandwidth (MB/s) box. By default, the iSR6200.uses all availablebandwidth; the minimum bandwidth required for data migration is 50Mbps.7. For Load Balancing, click either Enabled or Disabled. By default, loadbalancing is enabled.8. For LUN Info Display, specify whether the array’s LUNs are identified byLUN ID, WWULN, or Serial Number.9. To save your changes, click Save.10. If the Data Migration Security Check dialog box opens, enter theadministrative password. (The default password is migration.)SANsurfer iSCSI/FC Router Manager displays an informative messageindicating that the array properties have changed.11. Click OK to close the message box.12. To apply the changes and update the window before changing other arrayproperties, click Refresh.Creating a Data Migration Job GroupFollow these steps to create a data migration job group in SANsurfer iSCSI/FCRouter Manager.To create a data migration job group:1. In the left pane, click the Services tab to open the Services page.By default, the iSR6200 shows Group 0 created under the Data MigrationJobs item in the left pane.2. In the left pane, right-click Data Migration Jobs, and then on the shortcutmenu, click Add Group. (Or on the Wizards menu, click Add Group.)3. In the Create New Group dialog box, type a group name that you want toassign to administer a set of data migration jobs, and then click OK.4. In the Data Migration Security Check dialog box, type the data migrationuser password (default is migration), and then click OK.
