6–Command Line Interfaceset fcISR654608-00 C 6-65set fcSets the port status and programmed connection status.Authority adminExamples The following example shows the set fc command:iSR6200 <1> (admin) #> set fcA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.WARNING:The following command might cause a loss of connections to both ports.Configuring FC Port: 1-------------------------Port Status (0=Enable, 1=Disable) [Enabled ]Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb, 8=8GB) [Auto ]Frame Size (0=512B, 1=1024B, 2=2048B) [2048 ]Execution Throttle (Min=16, Max=65535) [256 ]All attribute values for Port 1 that have been changed will now be saved.Configuring FC Port: 2-------------------------Port Status (0=Enable, 1=Disable) [Enabled ]Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb, 8=8GB) [Auto ]Frame Size (0=512B, 1=1024B, 2=2048B) [2048 ]Execution Throttle (Min=16, Max=65535) [256 ]
