Qualstar RLS-4470 Technical & Service Manual

Contents

Qualstar RLS-4470 Technical & Service Manual Manual pdf 142 page image

7-38 Field–Replaceable Units (FRUs) 501510 Rev. S1. Open the front panel/door as described in Section 7.4.2. Insert the drive filler into the empty drive bay making sure that the tab is in-serted into the drive slot. See Figure 7-19 for a view of the drive slot location.3. Tilt the drive filler upwards and back towards the rear of the library until it isvertical and fits securely in the drive bay.4. To remove a drive filler gently pull it backwards and downward until it is freefrom the drive bay.7.12 Serial Control Panel PCBAP/N 501507-01-6The Carriage Assembly must be removed from the RLS before the Serial ControlPanel PCBA can be replaced. No calibration is required after replacing the SerialControl Panel PCBA.Tools Required:• No. 1 Phillips Screwdriver• No. 2 Phillips ScrewdriverENTER MENUREADY BUSYEXITFAULT6 Mounting ScrewsChassisFigure 7-22 Serial Control Panel PCBA