501510 Rev. S The Private Menu 5-19Value Type DescriptionLocation Location Enter the location of the item you wish to query.Ejected TRUE/FALSE A TRUE value indicates a tape is in the ejected position (Tape Drivesonly).EjectedValid TRUE/FALSE A TRUE indicates the Ejected value is known to be correct.Label Error TRUE/FALSE A TRUE value indicates that no label was detected during scanning.Label Valid TRUE/FALSE A TRUE value indicates the RLS attempted to read the barcode label.Label Data Indicates the value read from the selected location’s barcode (if present)Occupied TRUE/FALSE A TRUE value indicates that a cartridge occupies the selected location.Occup.Valid TRUE/FALSE A TRUE value means the Occupied status for the selected location isvalid.Present TRUE/FALSE A TRUE value indicates that a drive or other device is present at the se-lected location.Pres. Valid TRUE/FALSE A TRUE value means the Present status for the selected location is valid.Source Loc. Data The Source value indicates the prior location of the cartridge that is cur-rently at the selected location. The Item value is an internal number.Source Valid TRUE/FALSE A TRUE value means the Source Location data for the selected locationis valid.Type Data This value indicates the type of element that is at the selected location:DRIVE, HANDLER or magazine SLOT.Table 5-2 Private\Display Locations Descriptions5.4.12 The Private\Display Positions status screenP••Display PositionsGripper: dddddX: dddddPeriod X: dddddZ: dddddPeriod Z: dddddThe Display Positions status screen displays the current position of the three carriagemotor-driven positioners. The positions are given in motor steps, counted from thehome position of each axis. There are 24 steps per revolution for the horizontal (X)motor Axis and Insertion (Z) Axis motors. There are 200 steps per revolution for theGripper Axis motor.• GripperThis value indicates the current step position of the gripper stepper motor.• XThis value indicates the current position of the horizontal (X-Axis) motor. Thevalue decreases as the carriage moves to the left. When the carriage is all theway to the right stop, after a successful POST, the position is zero.
