Chapter 6: Getting Information About the LibraryViewing Library Information on the Operator PanelQuantum Scalar i40 and Scalar i80 User’s Guide 151Viewing Library Information on the Operator PanelThe operator panel provides several brief reports about the library.Viewing PartitionInformationThe operator panel provides an overview of partition information. Foreach partition, you can see the following information:• Online/offline mode• Control path tape drive location coordinates• Number of tape drives• Number of storage slots• Number of I/E station slots containing a tape cartridge assigned tothe partitionOperator Panel1 Select Reports > Partitions.2 Use the Up and Down buttons to select a partition and click Next.Viewing NetworkSettingsA short report on the operator panel displays the library’s networksettings: library name, IP address, and network configuration.Operator Panel1 Select Reports > Network Settings.2 If IPv6 is enabled, the IPv4 information is shown on the first screen.Press Next to see the IPv6 address information on the next two ormore screens. Although the library can have unlimited IPv6 address,a maximum of three are shown in this report.
