Chapter 4: Configuring the LibrarySetting the Date, Time, and Time ZoneQuantum Scalar i40 and Scalar i80 User’s Guide 51• NTP server IP addresses must be entered in the proper format. SeeConfiguring Network Settings on page 42 for the proper format ofIPv4 and IPv6 addresses.• After you apply NTP settings, system clock synchronization may takeseveral minutes.You can only enable and configure NTP on the Web client.Web Client1 Select Setup > Date & Time.2 Refer to the library Web client online help for detailed instructions.To view the help, click the Help icon in the upper right corner of thescreen.Setting the Time Zone To select your time zone from a list, disable Use Custom Time Zonesetting and select your time zone.If your time zone does not appear on the list, or you want more controlover your time settings, enable Use Custom Time Zone and set aUniversal Coordinated Time (UTC) offset.You can only set the time zone via the Web client.Web Client1 Select Setup > Date & Time.2 Refer to the library Web client online help for detailed instructions.To view the help, click the Help icon in the upper right corner of thescreen.Setting Daylight SavingTimeIf you selected your time zone from the drop-down list (see Setting theTime Zone on page 51), the library automatically adjusts for daylightsaving time. There is no need to manually reset the clock for timechanges.
