QLS-4100 Xe 6-7Vertical BaselineThis function is used to synchronize printing when using multipleQLS-4100 Xe printers. If you are sending the same image file to two or moreprinters and notice that the image prints in different vertical locations, youcan use this function to move the vertical baseline of a printer.To adjust the vertical baseline:1 If the printer is in a Ready state, press the PRINT/PAUSE key to pausethe printer.2 Press the NEXT or PREVIOUS key until the Cal & Setup menu isdisplayed. Then press the SELECT key.3 Press the NEXT or PREVIOUS key until the Vertical Baseline menu isdisplayed.4 Press the + or – key until the desired baseline setting is displayed.Baseline settings range from -120 through +120 dots.5 Press the SELECT key to confirm the baseline.6 Repeat this process on each printer requiring a baseline adjustment.Vertical BaselineBaseline = +0Pause: Cal & SetupPress SELECT
