8-20 Print & PeelPeel DelayWhen labels are printed, they are advanced from the front of the printer forremoval. After you remove a label, the printer will wait for a specifiedamount of time before performing the next action (pulling media back,advancing another label, etc.). You can adjust this time if necessary.Note: This option is available only in Print & Peel modes.To adjust the peel delay:1 If the printer is in a Ready state, proceed to the next step.If the printer is in a Pause state, press the NEXT or PREVIOUS key untilthe Adjust menu is displayed. Then press the SELECT key.2 Press the NEXT or PREVIOUS key until the Peel Delay menu isdisplayed.3 Press the + or – key until the desired peel delay setting is displayed.Peel delay settings range from 0.0 seconds to 10.0 seconds.4 Press the SELECT key to confirm.Peel DelayDelay = +0.0 secPause: AdjustPress SELECT
