QLS-4100 Xe 8-3Compatible MediaStandard QLS-4100 Xe media types including paper and synthetic may beused. However, some flexible synthetic media types may not peel reliablyand it is recommended that any application be qualified by QuickLabel toensure reliable operation.Print & Peel is to be used with adhesive backed labels on continuous liner.Card stock or solid media cannot be used. Perforated liner cannot be used.Round, Oval or clear labels will not trigger the peel sensor. In these cases aremote input may be wired to trigger printing of the next label. For remoteinput or other wiring information, contact QuickLabel Technical Support.For some small diameter round labels (less than 4 inches) it may be possibleto adjust the form stop and still trigger the sensor with the label.Compatible Media SpecificationsMinimum Media Width 2 inches (51 mm)Minimum Peel Length 1 inch (25 mm)Maximum Peel Length 16.0 inches (400 mm)Maximum Supply RollDiameterUp to 12 inches (outside diameter)Maximum Rewind Capacity Up to 10 inches (outside diameter)This rewind capacity rewinds all liner fromthe maximum supply roll.
