4-46 Keypad controls and menusTCP/IP Subnet MaskYou will use the TCP/IP Subnet Mask option in the Communications menuto set a subnet mask for the QLS-4100 Xe printer.The default subnet mask is 255.255.255.1.Note: For more detailed information on the topic of networking, refer to thedocumentation applicable to your network environment and/or contact yournetwork administrator.To set the TCP/IP subnet mask:1 If the printer is in a Ready state, press the PRINT/PAUSE key to pausethe printer.2 Press the NEXT or PREVIOUS key until the Communications menu isdisplayed. Then press the SELECT key.3 Press the NEXT or PREVIOUS key until the TCP/IP Subnet Mask menuis displayed.4 Press the + or – key to increase or decrease the first number in theaddress, then press the SELECT key.Press the + or – key to increase or decrease the second number in theaddress, then press the SELECT key.Press the + or – key to increase or decrease the third number in theaddress, then press the SELECT key.Press the + or – key to increase or decrease the fourth number in theaddress, then press the SELECT key.5 Press the SELECT key to confirm the TCP/IP subnet mask.TCP/IP Subnet Mask255.255.255.1Pause: CommunicationsPress SELECT
