RCA F27689 User Manual
Also see for F27689: User guide
                                                                | |
Contents
| 
4Setup and ConnectionsStep 1: Unpack the TVMake sure to locate the remote control.Step 2: Connect your TVThere are three types of connections outlined in this section:TV Only: If you’re only going to connect theTV to your home antenna or cablesystem.The Basic Connection: If you’re going to connect the TV to aVCR or satellite receiver.Advanced Connections: If you’re going to make multipleconnections, hooking up the TV toone or two VCRs, DVD player, and asatellite receiver.Cable information and illustrations are given for each type of connection.Once you have completed your desired connection you may skip forwardto Step 3.TV OnlyThis is a basic connection from an antenna or cable system to your TV.Connect the cable into the Cable/Antenna jack as shown.CablesYou will use the following cable to make your connection:Coaxial Cable: These cables carry audio and videosignal to the TV from an antenna, cable, orcable box.Important Stand InformationDirect View TVs: 27”- 36” diagonalCAUTION: Choose the location for your TVcarefully. Take precautions that the standor other furniture the TV is placed on isproperly located (see ImportantSafeguards sheet) and of adequate sizeand strength to prevent the TV fromaccidentally being tipped over, pushed off,or pulled off. This could cause damage tothe TV and/or personal injury.Before You ConnectProtect against power surges:• Connect all components beforeplugging any power cords into the walloutlet.• Turn off the TV and/or componentbefore connecting or disconnecting anycables.• Make sure all antennas and cables areproperly grounded. Refer to the SafetyTips sheet packed with your TV.Once you have completed this connection go to “Step 3:Connect the G-LINK Cable” on page 9.TVR L G-LINKPR PB YCABLE, CABLE BOX, OR ANTENNA |
Related manuals for RCA F27689
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine