5Setup and ConnectionsThe Basic ConnectionThe basic connection below (TV and VCR) is the most commonconnection and is therefore used to illustrate a single componentconnection with your TV. For better sound and picture quality andmultiple component connection information refer to the next section,Advanced Connections.CablesYou will use the following cable to make yourconnection:Coaxial Cables: These cables carry both the audio and video signal tothe TV from an antenna, cable, or cable box. In this connection, a secondCoaxial Cable carries the signal through the VCR to the TV.VCR 1TVR L G-LINKP R P B YAUDIOVIDEOOUTIN FROM ANTOUT TO TVCH3CH4FROM CABLE, CABLE BOX, OR ANTENNAOnce you have completed this connection go to “Step 3:Connect the G-LINK Cable” on page 9.How to View the VCRTo watch the VCR in this connection tune TV toChannel 3 or 4.Later, in the Interactive Setup section you willprogram the TV to automatically tune to Channel 3 or4 when you turn on the VCR.
