RCA RCU1010RF Quick Start Manual

Also see for RCU1010RF: Quick start guide User guide

Contents

RCA RCU1010RF Quick Start Manual Manual pdf 6 page image

Clear All Stored Learned Commands Under a ModeClearing all stored Learned commands under a specific mode allows you to continuously update yourremote with the latest commands. To clear all Learned commands under one mode (e.g., TV, VCR, DVD,PVR/DVR, etc.), follow these steps:1. Press and hold the SETUP key until the touchscreen showsthe Code Setup Mode? Screen. Release the SETUP key.2. Press and release the SETUP key repeatedly until theDelete IR Mode? Screen appears.3. Press and release the desired component key for theLearned commands to be cleared (TV, VCR, SAT, AUX, etc.).Note: Only the components that have previouslyprogrammed Learned commands are shown on theLCD touchscreen.4. The Confirm to Delete? Screen is displayed. Press andrelease the OK key on the touchscreen. The display showsthe Deleting Wait Screen. If there are no other componentmodes with Learned commands, the Learn IR Mode? Screenappears. If there are other component modes with Learnedcommands, the Delete IR Mode? Screen is displayed.5. All Learned commands that were previously stored underthat mode are now cleared. To exit the Setup Mode, pressand release the EXIT key, followed by the LCD OK key onthe Exit Setup Screen.Master ClearThis feature allows you to simultaneously delete all Learned commands. Clearingall stored Learned commands is recommended before first-time Learning.1. Press and hold the SETUP key until the touchscreen showsthe Code Setup Mode? Screen. Release the SETUP key.2. Press and release the SETUP key repeatedly until the DeleteIR All? Screen appears.3. Press and release the LCD OK key.Note: If, at this point, you wish to abort the Master Clearoperation, press and release the LCD EXIT key.4. The Confirm to Delete? Screen is displayed. Press and releasethe LCD OK key. The LCD touchscreen displays the DeletingWait Screen, followed by the Learn IR Mode? Screen.5. All Learned commands are now cleared for all componentmodes. To exit the Setup Mode, press and release the EXITkey, followed by the LCD OK key on the Exit Setup Screen.Learn a Command (continued)11.The Learning process is now complete. To exit the Setup Mode, press and release the EXIT key, followed bythe LCD OK key on the Exit Setup Screen.Note: If the EXIT key does not respond, press and release the SETUP key repeatedly until the Exit SetupScreen appears.RCU1010RF_US_QS_revA 9/12/03 16:01 Page 6

/ 8

Related manuals for RCA RCU1010RF