RCA RCU1010RF Quick Start Manual

Also see for RCU1010RF: Quick start guide User guide

Contents

RCA RCU1010RF Quick Start Manual Manual pdf 8 page image

Delete a SmartMacroTo delete a SmartMacro that has previously been programmed, follow these steps:1. Press and hold the SETUP key until the touchscreen showsthe Code Setup Mode? Screen. Release the SETUP key.2. Press and release the SETUP key repeatedly until the Deletea Macro? Screen appears. Press and release the LCD OK key.3. The LCD displays the Delete Macro Key? Screen. Press andrelease the LCD MACRO key (1-9) to select the previouslyprogrammed Macro you wish to delete.4. The LCD touchscreen displays the Confirm To Delete? Screen.Press and release the OK key on the touchscreen.Note: If you are in the process of deleting a SmartMacro andyou decide not to delete it, you can abort the deletion processby pressing the LCD EXIT key.5. If there are additional Macros already programmed,the touchscreen displays the Delete a Macro? Screen again.You may delete additional macros at this point, if you wish.6. If there are no previously programmed Macros, thetouchscreen displays the Set a Smart Macro? Screen.7. The Macro deletion is now complete. To exit the Setup Mode,press and release the EXIT key, followed by the LCD OK keyon the Exit Setup Screen.Restoring Original SettingsMaster ResetA Master Reset returns all the RCU1010RF remote defaults to the original factory settings. The Master Resetclears all customer-programmed codes, Learned commands and SmartMacros, and resets all key labels.To perform a Master Reset, follow these steps:1. Press and hold the SETUP key until the touchscreen showsthe Code Setup Mode? Screen. Release the SETUP key.2. Press and release the SETUP key repeatedly until the ResetALL? Screen appears.3. Press and release the LCD OK key.4. The LCD displays the Confirm to Reset? Screen. Press andrelease the LCD OK key. The Please Wait Screen appears andthe LCD touchscreen turns off.5. All settings are now reset to the factory default.RCU1010RF US Quick Start Guide RevAExecute a SmartMacroTo execute a SmartMacro that has previously been programmed, follow these steps:1. Press and release the SETUP key, the BACKLIGHT key, orany LCD touchscreen key to activate the LCD touchscreen.2. Press and release the LCD MACRO key.3. Press and release the programmed LCD MACRO key numbercorresponding to the sequence you wish to activate.4. If the keypress beep is enabled, you hear a series of beepsas the Macro executes. The number of beeps you hearcorresponds to the number of Learned commands withinthe SmartMacro.RCU1010RF_US_QS_revA 9/12/03 16:01 Page 8

/ 8

Related manuals for RCA RCU1010RF