Chapter 3 The Remote ControlChapter 3 The Remote Control525. Repeat steps 4 and 5 to delete more functions.6. When the selected functions are deleted press the CLEAR button to exit the IRDELETE programming mode. (EXIT SETUP appears in the remote’s display andthe remote returns to its original operation mode).Notes:• Press the CLEAR button at any time to exit the programming mode (EXITSETUP will appear to confirm that no new codes have been entered).• If about 30 seconds passes before a button is pressed, the LCD displaywindow will stop transmission to conserve battery life. If this occurs,restart from step 1.• To delete all learned keys at one time, do an operations reset or amanufacturer’s reset (go to page 58 for instructions).How to Use the Volume Lock FeatureThis programming mode will lock the volume of the components that have volumecontrol. You may need to experiment with your system since products made bydifferent manufacturers work differently.Locking the Volume (VOL LOCK)1. Press and hold (the backlight button) until CODE SET appears in theremote’s display.2. Step through the programming menu by pressing the down arrow button untilVOL LOCK appears in the remote’s display window, then press the OK button.3. The display message TO MODE appears, prompting you to enter thecomponent to apply the volume lock.4. Push the component button of your choice to apply the VOL LOCK mode.5. If you’ve pressed a valid component button, SUCCESS appears, followed byEXIT SETUP.DIRECTVVCR1VCR2ON•OFF TVDVDAUXAUDM1L1M2L2M3L3FRONTSKIPMUTECH +VOL +VOL -CH - CENTERREARGOBACKFORMATTESTGUIDE INFOAM•FMOK LEVEL +LEVEL -MENUPROGRAMCLEAR1 2 34 5 67 8 90INPUT ANTFUNCTIONSTOP PAUSERECPLAY FWDREVSWAP CHCTRLPIP WHODSPON•OFFDSPMODEDELAYDisplaywindowComponentbuttonsThe downarrow buttonThe OKbuttonBacklightbutton
