Chapter 3 The Remote ControlChapter 3 The Remote Control58How to Reset the RemoteOperations ResetOperations reset clears all programming from the remote control EXCEPT thebuttons you’ve programmed to operate other components.1. Press and hold (the backlight button) until CODE SET appears in theremote’s display.2. Step through the programming menu by pressing the down arrow button untilOPS REST appears in the remote’s display, then press the OK button.3. Once you press the OK button, CLR SETUP appears until the OK button ispressed again.4. After the OK button has been pressed, the remote will perform a completeOperations Reset. Once the Operations Reset is complete the remote will exitthe Operations Reset mode and return to its normal operation.Note: Press the CLEAR button at any time to exit. EXIT SETUP will appear andthe remote will return to its normal operation.Manufacturing ResetThe Manufacturing Reset returns your remote to the way it was when it was packedwith product at the manufacturing facility. All programming will be cleared.1. Press and hold (the backlight button) until CODE SET appears in theremote’s display.2. Immediately press and release the RECORD button. The remote automaticallyenters the programming mode where the Manufacturing Reset will be accessed.3. Step through the programming menu by pressing the down arrow button untilMFR RESET appears in the remote’s display, then press the OK button.DIRECTVVCR1VCR2ON•OFF TVDVDAUXAUDM1L1M2L2M3L3FRONTSKIPMUTECH +VOL +VOL -CH - CENTERREARGOBACKFORMATTESTGUIDE INFOAM•FMOK LEVEL +LEVEL -MENUPROGRAMCLEAR1 2 34 5 67 8 90INPUT ANTFUNCTIONSTOP PAUSERECPLAY FWDREVSWAP CHCTRLPIP WHODSPON•OFFDSPMODEDELAY
