Programming InterfacePage 274 4OK n=0,3,4,5,7,8.CONNECT n=1,6.Error Otherwise.&Un Disable Trellis CodingThis command is used to enable and disable trellis coding for V.32 9600 bpsconnections only.&U0 Enable trellis coding.&U1 Disable trellis coding.Result Codes:OK n=0,1.Error Otherwise.&Vn View Active Configuration and Stored ProfileThis command is used to display the active and stored profiles (commands and Sregister settings) along with any stored telephone numbers. The following exampleillustrates typical &V information displayed for the AT&T HSM Complete ModemChip Set.Example:ACTIVE PROFILEB1 B116 B30 B41 B60 E1 L2 M1 N1 P Q0 V1 W0 X4 Y0 &B1 &C1 &D2 &G0 &J0&K3 &L0 &P0 &Q0 &R0 &S0 &U0 &X0 &Y0%A013 %C1 %E1 %G0 %01 \A3 \C0 \G0 \J0 \K5 \N3 \Q3 \T000 \V1 \X0 -J1 *H3*O016S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:002 s07:030S08:002 S09:006 S10:014 S11:095 S12:050 S18:000 S25:005 S26:001S37:000 S112:000
