Programming InterfacePage 494 4Bit 2 Enable the CARRIER result codeBit 3 Enable the PROTOCOL result codeBit 4 ReservedBit 5 Enable the COMPRESSION result codesBit 6 Enable the PROTOCOL result codes 81-88 for MNP connections(in place of result code 80)S108 Signal Quality Selector0 No limit1 Low quality2 Medium quality3 High qualityDefault: 001S109 V.32terbo Carrier Speed SelectorBit 0 ReservedBit 1 4800 bits/s *Bit 2 7200 bits/sBit 3 9600 bits/sBit 4 12.0 Kbits/sBit 5 14.4 Kbits/sBit 6 16.8 Kbits/s (if applicable)Bit 7 19.2 Kbits/s (if applicable)S110 V.32/V.32bis/V.32terbo Selector0 V.32 enabled1 V.32bis enabled2 V.32bis and automatic rate renegotiation enabled3 V.32terbo enabled4 V.32terbo and automatic rate renegotiationDefault: 002 (004 for 19.2 Data/FAX)S112 DTE Speed Select During Data Transfer
