EXM-31 Hardware ReferencePage 324 4MNP LAPM\A0 Max 64 characters Max 64 characters\A1 Max 128 characters Max 128 characters\A2 Max 192 characters Max 128 characters\A3 Max 256 characters Max 128 charactersResult Codes:OK n=0,1,2,3.Error Otherwise.\Bn Transmit BreakThis command sends a break to the remote modem. It is equivalent to using the key on your terminal. This command can be used if your keyboard doesnot have a key.\B1 - \B9 Break length in 100 ms.Default = 0 Break of 300 ms is transmitted.\Cn Set Autoreliable BufferThis command determines whether the modem chip set buffers the data it receivesduring link negotiation.\C0 Does not buffer data.\C1 Buffers data on answering modem for 4 seconds, until 200characters have been buffered, and then switches to normal modeand the buffered characters are passed to the serial port. If a SYNcharacter is detected, reliable mode is attempted.\C2 Does not buffer data on answering modem. Switches to normalmode upon receipt of autoreliable character and passes it to serialport.Result Codes:OK n=0,1,2.Error Otherwise.\Gn Set modem Port Flow Control
